Vectaire

Ventilation specialist

WHHR100/90DC-B-BY

  • with summer bypass and frost-stat
  • efficient, low energy solution to controlling condensation and pollution in residential properties up to 150m2
  • up to 92% heat exchange efficiency
  • variable choice of low (trickle), boost and purge speed at installation
  • for ceiling, loft or void installation
  • low noise levels
  • low running costs
  • complies with Building Regulations Parts L1A 2013 and F 2013
  • manufactured in UK to ISO 9001
  • accurate commissioning via remote LCD commissioning unit
  • non-bypass models available

General

  • up to 78 litre/sec at 50Pa - max 83 litre/sec capacity
  • sfp down to 0.63 W/l/s
  • summer bypass activated when inside temperature is above 24ºC (and outside temperature between 14ºC and 24ºC);
  • frost-stat - proportionally reduces intake motor speed as temperature falls - activated when the outside temperature between +2ºC to -8ºC.
  • run-time and power outage counters
  • easy to install and maintain
  • for ceiling, loft or void in-line installation
  • variable low (trickle), boost and purge options for each motor
  • boost speed can be activated by a 230V switched live, or a 0-10V connection from:
    • a light switch (if more than one light switch is used, each one must be a double pole switch)
    • Remote humidistat (230V - DRH240)
    • Passive infra red (230V - PIRFF)
    • Thermostat (230V - THM)
    • Remote switch/pull cord - 230V
  • very low noise levels
  • low running costs
  • 5 year warranty - 1 year parts and labour, 4 years parts only

CONTROL FEATURES - STANDARD

  • independent variable speed adjustment for each motor for trickle, boost and purge speeds.
  • adjustable boost speed over-run timer from 0 to 30 minutes.
  • adjustable boost speed delay from 0 to 5 minutes
  • adjustable purge speed over-run timer from 0 to 250 minutes, pre-set to 15 minutes (adjustable at factory).
  • adjustable night time boost and purge inhibitor
  • integral frost-stat - proportionally reduces intake motor speed as temperature falls
  • automatic summer bypass (except non-bypass models)

CONTROL FEATURES - FACTORY SET

  • change of ductwork handing on humidistat version (trip point can be set at manufacture)
  • integral humidistat - proportionally increases motor speeds with rising humidity
  • 0-10V connections can be added for:
    • BMS - for remote motor shut-off
    • CO2 detector
    • home automation system
    • external pre-heater
    • 3 speed selector switch
  • purge speed over-run time
  • holiday mode for reduced speeds when property is unoccupied (factory set option) - default setting is 50% of trickle speed
  • run-time and power outage counters downloadable via QR code.

Vectaire Ltd can supply all accessories for use with these units, including air filter cassettes, silencers, fire dampers, air valves, ducting, outside grilles and wall cowls. Additionally, Vectaire offers a design service to ensure that the unit installed is the best possible to provide efficient, effective, low energy and low running cost ventilation. Vectaire can also organise installation, commissioning and maintenance of these products



Back to top

Specification

  • compact unit
  • casing from galvanised sheet with epoxy finish
  • thermo-acoustic lining
  • pre-wired for easy electrical connection
  • low energy EC brushless motor with single width, single inlet, direct drive, forward curved impellors
  • operates in temperature up to 60ºC
  • easy to access standard, disposable G3 filters
  • counter flow heat exchanger


Back to top

Compliance

  • Part L1A 2013 of Building Regulations for enhanced energy saving capability
  • Part F 2013 of Building Regulations for reliable, efficient ventilation
  • EU RoHS Directive Compliant.
  • Complies with IEC60335-2-80, LVD2006/95/CE and EMC2014/30/UE (European Directive against radio interference and electro-magnetic compatibility
  • manufactured in UK to ISO 9001
  • SAP PCDB Listed
  • CE marked


Back to top

Range

  • WHHR90DCB-TABY - top access with bypass
  • WHHR90DCB-BABY - bottom access with bypass
  • WHHR90DCB-TABYH - top access, with bypass and humidistat
  • WHHR90DCB-BABYH - bottom access, with bypass and humidistat
  • WHHR10090/DCB - top access
  • WHHR100/90DCBBA - bottom access


Back to top

Pressure

*

Back to top

Dimensions

*

Back to top

Typical specification

  • The unit will:
  • be manufactured by Vectaire Ltd.
  • be constructed from galvanised steel sheet with an epoxy finish and have thermo-acoustic lining to ensure extremely low noise levels.
  • be suitable for installation in-line in ceilings, voids or lofts
  • have drain connections for connection by others.
  • have a high efficiency counterflow heat exchanger with a thermal efficiency of up to 92% .
  • have two low energy, high efficiency EC fan motor assemblies.
  • have a specific fan power from 0.63 W/l/s.
  • have G3 grade filters to protect the heat exchanger.
  • have an automatic summer bypass
  • have an integral frost-stat
  • Access to filters shall be from the bottom by removing two magnetic strips.
  • The unit shall incorporate the following control features:

Standard

  • independent variable speed adjustment for each motor for trickle, boost and purge speeds.
  • adjustable boost speed over-run timer from 0 to 30 minutes.
  • adjustable boost speed delay from 0 to 5 minutes
  • adjustable purge speed over-run timer from 0 to 250 minutes, preset to 15 minutes (adjustable at factory).
  • adjustable night time boost and purge inhibitor
  • integral frost-stat - proportionally reduces intake motor speed as temperature falls
  • summer bypass - automatic bypass of heat exchanger in hot weather

Factory Set speeds with rising humidity

  • integral humidistat - proportionally increases motor
  • 0-10V connections can be added for:
    • BMS - for remote motor shut-off
    • CO2 detector
    • home automation system
    • external pre-heater
    • 3 speed selector switch
  • purge speed over-run time
  • holiday mode for reduced speeds when property is unoccupied (factory set option)
  • run -time and power outage counters downloadable via QR code.
  • Remote (optional) LCD touch screen informs user of:
  • operating speed (user adjustable)
  • internal and external temperatures
  • status icons shows which functions currently controlling fan speed
  • date and time (user adjustable)
  • relative humidity level
  • bypass status
  • error and service notifications
  • filter saturation level (reset after changing)
  • user can also set system to holiday mode and set language
  • An LCD Commissioning Kit will allow the commissioning engineer or installer to set the following parameters:
  • Time and Date
  • Holiday Mode
  • Trickle, boost and purge speeds for each motor
  • Boost speed delay time duration
  • Boost over-run time duration
  • Night time boost inhibitor times
  • Touch screen sensitivity calibration
  • Pre-heater threshold (if fitted)
  • Handed installations
  • Activate CO2 detector or home automation system (if fitted)
  • The unit will:
  • be CE marked
  • comply with:
  • Part L1A 2013 of Building Regulations for enhanced energy saving capability
  • Part F 2013 of Building Regulations for reliable, efficient ventilation
  • EU RoHS Directive Compliant
  • IEC60335-2-80, LVD2006/95/CE and
  • EMC2014/30/UE (European Directive against radio interference and electro-magnetic compatibility
  • Be SAP PCDB Listed
  • manufactured in UK to ISO 9001
  • have a 5 year warranty -1 year parts and labour and 4 years parts only


Back to top

Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Bucks, HP12 3RH

Tel: +44(0)1494 522333. Fax: +44(0)1494 522337. http://vectaire.co.uk, e-mail: sales@vectaire.co.uk