• axial fans to exhaust air and fumes directly outside or through short lengths of ducting
• silent, slow-moving, delayed action automatic shutters
• all fans with cords can be either cord operated or have cord removed and be operated via remote switch
• adjustable timer - 3-15 minutes
• dynamic humidistat with night time set back and anti-hunting device
• humidistat fans with anti-vibration gasket
• easy plasterboard ceiling istallation with (optional) Ceiling Ring
• window installation uses AWK window kits
• AWKDG double glazing kits available for 10 and 15cm sizes
• whisper quiet operation
• IPX4 - Splashproof - can safely be installed in Zones I and II

• casings from shockproof and heat resistant plastics
• double insulated motors of shaded pole type mounted on self-lubricating, sealed ball bearings for long life
• motors incorporate thermal cut-out
• maximum ambient temperature - 40°C

• EN60335-2-80
• EC Low Voltage Directive 73/23-93/68
• EC Directive EMC89/336
• CE marked

• A10/4A, 12/5A - standard
• A10/4CA, 12/5CA, 15/6CA - pull cord or automatic
• A10/4AT, 12/5AT - overrun timer
• A10/4HCTA, - humidistat, cord, overrun timer, neon
• A15/6H2C - humidistat, 2 speed, cord, neon

SELV models available

Supply and install an A15/6CA modular axial kitchen fan as supplied by Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Bucks, HP12 3RH. The fan is to be suitable for installation either in a ceiling, wall or window, and have the facility of either being used manually (with the cord) or be operated as a fully automatic fan with remote switching. Shutters should be of the silent, slow moving, delay action type. The fan should be made of shockproof and heat resistant plastic, contain a motor with sealed, self lubricating bearings and be protected with a thermal cut-out. The fan should be double insulated, and be suitable for installation into Zones I and II. Fan to comply with all current IEE, EC and Building Regulations requirements for installation into a kitchen and be BEAB Approved.