• axial fans to exhaust air and fumes directly outside or through short lengths of ducting
• timer adjustable between 3 and 15 minutes (fixed grille models) and 3 and 25 minutes (ECO automatic models)
• dynamic humidistat with night time set back and anti-hunting device
• humidistat fans with anti-vibration gasket
• easy plasterboard ceiling installation with (optional) Ceiling Ring
• window installation uses AWK window kits
• AWKDG double glazing kits available for 10 and 15cm sizes
• whisper quiet operation
• IPX4 - Splashproof - can safely be installed in Zones I and II

SELV models available

• casings from shockproof and heat resistant plastics
• double insulated motors of shaded pole type mounted on self-lubricating, sealed ball bearings for long life
• motors incorporate thermal cut-out
• maximum ambient temperature - 40°C
• Passive Infra Red sensor range 3m/110 degrees

• EN60335-2-80
• EC Low Voltage Directive 73/23-93/68
• EC Directive EMC89/336
• CE marked

• A10/4, 15/6 - standard
• A10/4C - pull cord
• A10/4T - 15/6T - overrun timer
• A10/4HCT - humidistat, cord, timer

• ECO-A10/4A - automatic
• ECO-A10/4CA - cord, automatic
• ECO-A10/4AT - automatic, timer
• ECO-A10/4HCTA - humidistat, cord, timer, neon, automatic
• ECO12/5A - automatic
• ECO12/5CA - cord or automatic
• ECO12/5AT - automatic, timer
• A15/6CA - automatic, cord or remote
• A15/6H2C - humidistat, 2 speed, cord, auto, neon

SELV (Safety Extra Low Voltage) Fixed Shutters

• A10/4 CLV - cord or remote
• A10/4TLV - timer
• A10/4HCTLV - humidistat, cord, timer, neon
• A10/4PIRLV - passive infra red, low voltage

SELV (Safety Extra Low Voltage) Automatic Shutters

• A10/4CALV - automatic, cord or remte
• ECO-A10/C4ATLV - automatic, timer, cord or remote, low voltage
• ECO-A10/4HCTALV - humidistat, cord, timer, neon, automatic, low voltage

Supply and install an ECO-A10/4HCTA axial toilet/bathroom/shower-room fan as supplied by Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Bucks, HP12 3RH. The fan is to be suitable for installation either into a ceiling, wall or window, and be complete with an integral, adjustable, dynamic humidistat, an integral adjustable timer and have a pull-cord so that the fan can be operated manually as well as automatically via the humidistat. There should be a neon on the front of the fan to indicate manual control. The fan should be made of shockproof and heat resistant plastic, contain a motor with sealed, self-lubricating bearings and be protected with a thermal cut-out The fan should be double insulated and be suitable for installation into Zones I and II. The fan is to CE marked, and comply with current Safety Regulations.. The fan should finally comply with Building Regulations requirements for installation into a toilet/bathroom or shower-room.