ventilation specialist

"RMF 100" Ultra Slim Extract Fans

  • Recessed low profile, high pressure duct fans
  • 2 models
  • IPX4 - Splashproof
  • for toilets, shower-rooms, bathrooms and utility rooms
  • For walls or ceilings
  • Standard and Timer
  • Exceeds Building Regulations requirements (including new Document F)

General

  • ultra low profile - only 18 mm
  • high pressure duct fan to exhaust air and fumes through long lengths of rigid or flexible ducting
  • hole diameter 6"/15cm - duct size 4"/10cm
  • integral backdraught shutter
  • adjustable timer - 3-15 minutes
  • dynamic humidistat with night time set back and anti-hunting device
  • humidistat model with neon to show fan in manual operation
  • neon indicator to show fan is switched on
  • easy plasterboard ceiling installation with (optional) Ceiling Ring
  • easy wiring of "T" model with quick fix terminal block
  • whisper quiet operation
  • IPX4 - Splashproof - can safely be installed in Zones I and II


Back to top

Specification

  • casings from shockproof and heat resistant plastics
  • double insulated motors of shaded pole type mounted on self-lubricating, sealed ball bearings for long life
  • motors incorporate thermal cut-out
  • maximum ambient temperature - 40°C


Back to top

Compliance

  • EN60335-2-80
  • EC Low Voltage Directive 73/23-93/68
  • EC Directive EMC89/336
  • CE marked


Back to top

Range

  • RMF100 - standard
  • RMF100T - overrun timer
  • RMF100LV - standard - SELV
  • RMF100TLV - overrun timer - SELV
  • ACR6 - Ceiling Ring
  • AWVK 10/4 - Wall Vent Kit (Comprises 14" length of Flexi-Duct and 4" White Fixed Grille)
  • RMF-SP - RMF Spacer Frame (for semi recessing)


Back to top

Features

*fan profile*quick fit terminal block


Back to top

Installation

*wall*ceiling


Back to top

Wiring

*standard*Timer*standard - SELV*timer - SELV


Back to top

Pressure

*


Back to top

Dimensions

*


Back to top

Accessories

*Fixed Grille*Gravity Grille*Wall Vent Kit*Wall Duct Kit*Ceiling Ring


Back to top

Typical specification

Supply and install a Vectaire RMF100T recessed duct fan for toilets, shower-rooms, bathrooms and utility rooms as supplied by Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Bucks, HP12 3RH. This fan is to be suitable for installation either in a ceiling or a wall with a 6”/15cm hole size and a 4”/10cm outlet. The fan should be complete with an integral backdraught shutter and have an over-run timer. The fan should be made of shockproof and heat resistant plastics, contain a motor with sealed, self-lubricating ball bearings and be protected with a thermal cut-out. The fan should be double insulated, and be suitable for installation for Zones I and II. Fan to comply with all current IEE, EC and Building Regulations requirements for installation into a toilet, shower-room, bathroom or utility room.



Back to top