ventilation specialist

"SELV" Axial Extract Fans

  • Axial fans
  • 8 models
  • IP57 - SELV
  • For toilets, shower-rooms, bathrooms and utility rooms
  • For walls, ceilings or windows (with window kit)
  • Cord, Timer, Humidity Control and PIR
  • Fixed or automatic shutters
  • Exceeds Building Regulations requirements (including new Document F)

General

  • axial fans to exhaust air and fumes directly outside or through short lengths of ducting
  • adjustable timer - 3-15 minutes
  • dynamic humidistat with night time set back and anti-hunting device
  • humidistat fans with anti-vibration gasket
  • easy plasterboard ceiling installation with (optional) Ceiling Ring
  • window installation uses AWK window kits
  • AWKDG double glazing kits available
  • whisper quiet operation
  • can safely be installed in Zones I and II
  • all models with remote transformer


Back to top

Specification

  • casings from shockproof and heat resistant plastics
  • double insulated motors of shaded pole type mounted on self-lubricating, sealed ball bearings for long life
  • motors incorporate thermal cut-out
  • maximum ambient temperature - 40°C
  • Passive Infra Red sensor range 3m/110º


Back to top

Compliance

  • EN60335-2-80
  • EC Low Voltage Directive 73/23-93/68
  • EC Directive EMC89/336
  • CE marked
  • BEAB APPROVED


Back to top

Range

  • A10/4CLV - cord or remote
  • A10/4TLV - overrun timer
  • A10/4HCTLV - humidistat, cord and timer
  • A10/4ALV - automatic
  • A10/4CALV - automatic, cord or remote
  • A10/4CATLV - automatic, timer, cord or remote
  • A10/4HCTALV - automatic, humidistat, cord and timer
  • A10/4PIRLV - PIR


Back to top

Features

*PIR sensor - activated by proximity*PIR sensor - activation range


Back to top

Installation

*Window*Ceiling*Wall*Duct


Back to top

Wiring

*A10/4ALV*A10/4HCTLV - A10/4HCTALV*A10/4CLV - A10/4CALV - A10/4PIRLV - A10/4CATLV (pull cord)*A10/4TLV - A10/4CATLV (Remote Switch


Back to top

Pressure

*


Back to top

Dimensions

*


Back to top

Accessories

*Fixed Grille*Gravity Grille*Wall Vent Kit*Wall Duct Kit*Ceiling Ring*Window Kit


Back to top

Typical specification

Supply and install an A10/4TLV modular, axial toilet/bathroom/shower-room fan as supplied by Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Bucks, HP12 3RH. The fan is to be suitable for installation either into a wall, ceiling or window, and be complete with an integral, adjustable, timer. The fan should be made of shockproof and heat resistant plastic, contain a motor with sealed, self-lubricating bearings and be protected with a thermal cut-out The fan motor should be double insulated. The fan is to be BEAB Approved and Marked, CE marked, and comply with current EC Low Voltage Directive EMC89/336 and with BSEN60529. The fan should finally comply with Building Regulations requirements for installation into a toilet/bathroom or shower-room. The fan should be SELV (IP57) rated, and comply with all current IEE, EC and Building Regulations requirements for installation into a toilet, shower-room, bathroom or utility room.



Back to top